Brackish Water Reverse Osmosis Systems


Brackish Water Reverse Osmosis Systems

Brackish Water Reverse Osmosis

Aqua Clear Water Treatment Specialists Brackish Water Reverse Osmosis




Brackish water is defined as water that has Total Dissolved Solids (TDS) between 1,000 and 15,000 ppm or mg/L. In brackish water there are smaller levels of dissolved minerals and salts then sea water, or other high saline content waters. Typically, impurities such as these make for water that is very hard to use in many applications. Water that contains too much salt content to be labeled as potable water, but not salty enough to be labeled as seawater falls into the category of brackish water. When talking in regards to well water generally fresh groundwater can mix with brine water and produce brackish water. This brackish well water if not treated correctly can damage homes, agriculture and many other applications. Aqua Clear Water Treatment Specialists designs, custom engineers and manufactures brackish water reverse osmosis systems for virtually any desired application.

Aqua Clear Water Treatment Specialists manufacture and specialize in brackish water reverse osmosis systems from 500 to 1,000,000+ gallons per day.

Operation :
  • Maximum feed water temperature: 38°C/100°F *
  • Minimum feed water temperature: 38°C/100°F *
  • Maximum SDI: <3
  • Maximum turbidity: 1 NTU
  • Maximum feed water TDS: 15,000 ppm
  • Maximum hardness: 0 gpg **
  • Maximum Silica Tolerance: 60 ppm ***
  • Maximum iron: .05 ppm
  • Feed water pressure: 20 to 80 psi
  • Operating pressure: 150 to 250 psi****
  • pH feed range: 3-11
  • Maximum feed chlorine: 0 ppm *****


* Feed water temperature affects how the system performs and produces. All system performance based on 25°C/77°F feed water temperature.
** Antiscalants or pre-treatment may be required to prevent membrane scale and prolong membrane life.
*** Based on a 60% recovery.
**** Operating pressure is determined by feed TDS and temperature.
***** Pre-treatment required for chlorine removal of the feed water to prevent membrane damage.

  • Compact design
  • Fast installation and start-up
  • Range of pressures and capacities
  • High recovery rates
  • Low equipment costs
  • Low energy consumption
  • Operator friendly

brackish-water-reverse-osmosis-system-172k-gpd-thumbnail brackish-water-reverse-osmosis-system-58k-gpd-thumbnail

The Clear Choice for Commercial and Industrial Water Treatment Systems and Services.